I was wondering why the A2 emissions fuel tank -34P only lists one valve guard (2910-01-138-0916, 11613719) required, when there are three similar hard line inlets for the tank? Same bolt pattern and size. Since the driver's seat is right above these connections, wouldn't it make sense for all three to have this vent guard?
I'm looking to acquire two of these items.
Figure 29, item #9 in the -34P.
M151A2 Emission Tank Fuel Valve Covers Wanted
Moderators: rickf, raymond, Mr. Recovery
M151A2 Emission Tank Fuel Valve Covers Wanted
Jim Peterson
SGM, 31B Retired 2015
1961 M151 -Sold
1974 M151A2, Working It!
SGM, 31B Retired 2015
1961 M151 -Sold
1974 M151A2, Working It!
Re: M151A2 Emission Tank Fuel Valve Covers Wanted
The reason is probably because it is under the lowest part of the seat at the rear. The front of the seat has plenty of clearance. And anything sliding forward from the rear would contact there first if it got past the seat frame.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone