Free M151 parts.
Moderators: rickf, raymond, Mr. Recovery
-
- Sergeant First Class
- Posts: 243
- Joined: December 6th, 2007, 11:08 am
- Location: Ellensburg WA USA
Free M151 parts.
I've completed two A1's and doubt I'll restore another one anytime soon. I have a few other projects I want to do.
Anyhow, I need to get rid of some of the "stuff" I don't need. I've kept just about one of everything including a spare engine and transmission. I hate to throw this stuff in the trash if some of you guys can use it. Conditions are from NOS to used to maybe you might have a use for it. (Don't worry that's not my wife's living room carpet it's a scrap, I'll live another day ) I found all this stuff while looking for windshield pins for HK. I'll likely have more stuff as I go through it.
What I would like to do is make one trip to the post office after Christmas. The stuff is FREE. I'll put an envelope in the package, if you want to put a couple of dollar bills in the envelope to cover what I spent on postage that's great but not required.
I've made the following list from left to right of the photo like a typewriter. Post what you want here; I'll change the bullet number to an 'X' to indicate it's taken. Then, just PM me your address and mail the stuff around New Years.
XX. 25 amp alternator wires, one end is cut off.
XX. Instrument panel
XX. Gun mount bracket. (fasteners and floor piece are missing)
XX. Air filter bath
XX. Parking brake assembly parts
XX. Steering column brackets
XX. Tranny gear NOS.
XX. Bracket for ??? NOS.
XX. A2 spindle hub w/ backing plate.
XX. One headlight rubber/bolt.
XX. Used thermostat (good).
XX. Mount, engine to radiator.
XX. Seat belt brackets.
XX. Windshield brackets (I think they are A2)
XX. Oil pressure gauge
XX. A1 signal lens amber front
XX. U-joint barely used. Good spare.
XX. Shifter knob, pretty rough looking.
XX. Muffler clamp.
XX. Pintle MWO up-grade bolts.
XX. Thermostat housing, Corroded, but serviceable w/bolts.
XX. Windshield glass divider.
XX. Disassembled turn signal, good for parts??
XX. Motor pool gas cap lock bracket thingy.
XX. Engine lift bracket.
XX. A1 blackout housing
XX. 3 0f 4 battery terminal covers.
XX. Shifter cover.
XX. 151 regulator. Some of the bolts are broken off in the terminals. I don't know if it works.
XX. Electrical splitters. P/Nm527147-1
XX. 2 exhaust clamps NSN2900-01-047-2487
XX. 3 wheel cylinders with parts.
XX. Used radiator cap.
XX. Generator/alt. bracket bolts and clamp.
XX. Distributor w/cap. No coil or capacitor.
XX. One distributor wire…short.
XX. Three trailer lights.
XX. It's out of order; but bellows boot for transfer shifter NOS.
Last edited by Spike on December 26th, 2007, 8:45 pm, edited 10 times in total.
As iron sharpens iron ...
-
- Brigadier General
- Posts: 2068
- Joined: December 11th, 2007, 2:28 pm
- Mr. Recovery
- Brigadier General
- Posts: 2896
- Joined: December 5th, 2007, 9:03 pm
- Location: New Port Richey, Fl.
- Contact:
Parts
Spike, PM sent for # 38, 27, 22, 12, 6.
1960 M151 Run 1
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
1963 M151 Willys DoD 10-63 in Baltimore
1989 Alley Cat. "work in Progress"
NRA Life Member
American Legion Post 275 Fl
US Army 6 years 2nd Armored Cavalry Bindlach Germany
Colorado Army Nat. Guard 5 years
Md Air Guard 15 years active duty on C-130's
Spike Nate and i will take anything you don't need buddy.LOL
We can use that windshield pin for sure man!
Anything you don't need we would gladly share with Joe Dutton on his ongoing Non Demil USMC M151A1 Glove Box Jeep.
I know he will need just about everything at one point as he scored the Jeep from Nate and in a small trade of parts.
Joe like us lives on a shoe string budget and can use all the help he can get for sure.
Let us know and we will gladly pay the shipping cost for anthing you want to throw our way.
Bleddyn, Nate and Micki
OH PS Happy F-ing Holidays you old dog...LOL
Anything you don't need we would gladly share with Joe Dutton on his ongoing Non Demil USMC M151A1 Glove Box Jeep.
I know he will need just about everything at one point as he scored the Jeep from Nate and in a small trade of parts.
Joe like us lives on a shoe string budget and can use all the help he can get for sure.
Let us know and we will gladly pay the shipping cost for anthing you want to throw our way.
Bleddyn, Nate and Micki
OH PS Happy F-ing Holidays you old dog...LOL
OH Health depending Nate, Micki and I coming to Washington
Spike Nate, Micki and I will want to meet you in the flesh sometime this summer as we have been eyeing some Off orad events in Washington State to run the M151-LC in this summer, Oregon as well.
Depending on how quickly I can get my health under wraps again and if we get the Ford Racing Sponsorship we do at this time plan to make it up to Washington State to do some severe mountain trailing in the new rig.
This would be great as we would love to let you take this monster for a nice ride anyway...LOL
We are pretty much done with the East Coast trips for this year and need to apply our Time in Racing events all along the West Coast down to Mexico and this would give us the chance of a life time to meet you in person.
Some how or way we are coming to your neck of the woods buddy.
Bleddyn, Micki and Nate
Depending on how quickly I can get my health under wraps again and if we get the Ford Racing Sponsorship we do at this time plan to make it up to Washington State to do some severe mountain trailing in the new rig.
This would be great as we would love to let you take this monster for a nice ride anyway...LOL
We are pretty much done with the East Coast trips for this year and need to apply our Time in Racing events all along the West Coast down to Mexico and this would give us the chance of a life time to meet you in person.
Some how or way we are coming to your neck of the woods buddy.
Bleddyn, Micki and Nate
parts
Hey Spike
I could use a few things for my Kaiser project. Need'
#'s 16, 24, 26, and XX windshield devider. I'd like #9
if the shipping didn't kill me. I'll sit back to see if any
of it is still available when the dust clears.
Thanks,
Rainman
I could use a few things for my Kaiser project. Need'
#'s 16, 24, 26, and XX windshield devider. I'd like #9
if the shipping didn't kill me. I'll sit back to see if any
of it is still available when the dust clears.
Thanks,
Rainman
M151 World Land Speed Record Holder
-
- Sergeant First Class
- Posts: 243
- Joined: December 6th, 2007, 11:08 am
- Location: Ellensburg WA USA
Re: parts
I think the divider is gone I mark them "XX" as soon as someone wants them. I'll get #9 to you, I hate to toss it.Rainman wrote:Hey Spike
I could use a few things for my Kaiser project. Need'
#'s 16, 24, 26, and XX windshield devider. I'd like #9
if the shipping didn't kill me. I'll sit back to see if any
of it is still available when the dust clears.
Thanks,
Rainman
As iron sharpens iron ...
too slow
Thanks Spike,
I was too slow for # 24 also, but anything helps. I never posted
my list here, but with Ohiomutts help, I'll knock a big chunk out
of the list I had up on the other site.
Rainman
I was too slow for # 24 also, but anything helps. I never posted
my list here, but with Ohiomutts help, I'll knock a big chunk out
of the list I had up on the other site.
Rainman
M151 World Land Speed Record Holder
-
- Sergeant First Class
- Posts: 243
- Joined: December 6th, 2007, 11:08 am
- Location: Ellensburg WA USA
Re: OH Health depending Nate, Micki and I coming to Washington
The pin is yours, you still live on bunny run?M151-LC wrote:Spike Nate, Micki and I will want to meet you in the flesh sometime this summer as we have been eyeing some Off orad events in Washington State to run the M151-LC in this summer, Oregon as well.
Depending on how quickly I can get my health under wraps again and if we get the Ford Racing Sponsorship we do at this time plan to make it up to Washington State to do some severe mountain trailing in the new rig.
This would be great as we would love to let you take this monster for a nice ride anyway...LOL
We are pretty much done with the East Coast trips for this year and need to apply our Time in Racing events all along the West Coast down to Mexico and this would give us the chance of a life time to meet you in person.
Some how or way we are coming to your neck of the woods buddy.
Bleddyn, Micki and Nate
You're welcome to stay at my ranch. I have hundreds of acres you can wheel on, looks like Baja. You can chase the range cows, watch out for the buffalo though. Will give you a 'hot' and a 'cot.'
As iron sharpens iron ...
- Jay Mallari
- 1st Lieutenant
- Posts: 931
- Joined: December 7th, 2007, 10:30 pm
- Location: Middlesex, England