M416A1 brake lines
Moderators: rickf, raymond, Mr. Recovery
- richard
- Command Sergeant Major
- Posts: 620
- Joined: August 10th, 2011, 5:52 am
- Location: Lower Saxony, Germany
- Contact:
M416A1 brake lines
Is there any known source where I can find brake lines for the M416 A1? Shipping to Humble, TX, 77338.
Thanks a lot in advance,
Richard
Thanks a lot in advance,
Richard
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
Re: M416A1 brake lines
Probably easiest to make your own. Buy the tubing, a double flare tool and the ends.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
-
- Sergeant First Class
- Posts: 258
- Joined: January 17th, 2016, 5:38 pm
- Location: Reading (Boston) Mass
Re: M416A1 brake lines
Army Jeep Parts have complete USA made line sets.
- richard
- Command Sergeant Major
- Posts: 620
- Joined: August 10th, 2011, 5:52 am
- Location: Lower Saxony, Germany
- Contact:
Re: M416A1 brake lines
Rick, keep in mind, here in Europe everything is metric and inch isn't inch here when it comes to tubing. I have this problem with my M35. I am looking for the correct tool for the brake and air lines.
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
- richard
- Command Sergeant Major
- Posts: 620
- Joined: August 10th, 2011, 5:52 am
- Location: Lower Saxony, Germany
- Contact:
Re: M416A1 brake lines
Was my first thought and did not see them. I send George an email today.
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
Re: M416A1 brake lines
The tools range from super cheap to pretty high end. I like the hydraulic tools and direct press type tools. The cheaper tools tend to rotate as they form the flare and can split the tube unless you are careful. Eastwood and Summit both carry the tools I am thinking about. Once you have these tools you will never have to buy premade lines again. You have connections to the US for parts so all you need is bulk line and fittings. One thing to remember when flaring brake lines, or any line, is you always have to deburr the inside and outside of the cut end before starting the flare. That is the number one mistake people make.
This would be my first choice.
https://www.eastwood.com/professional-b ... -tool.html
Second choice
https://www.eastwood.com/eastwood-hydra ... -tool.html
Cheapie route, I have several of these. They do work but you have to lube the line with brake fluid before starting and everything has to be just right for a good flare.
https://www.eastwood.com/tubing-flaring ... ingle.html
And another tool you should have in your box for any kind of line work. Very handy.
https://www.eastwood.com/tubing-bender- ... s-kit.html
This would be my first choice.
https://www.eastwood.com/professional-b ... -tool.html
Second choice
https://www.eastwood.com/eastwood-hydra ... -tool.html
Cheapie route, I have several of these. They do work but you have to lube the line with brake fluid before starting and everything has to be just right for a good flare.
https://www.eastwood.com/tubing-flaring ... ingle.html
And another tool you should have in your box for any kind of line work. Very handy.
https://www.eastwood.com/tubing-bender- ... s-kit.html
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- svramselaar
- Major
- Posts: 1111
- Joined: December 30th, 2007, 6:48 am
- Location: holland
Re: M416A1 brake lines
hi
if i need some special brake parts i have them from C $ C parts baarlo holland
site is below in german
at the site bottom stand also german brake dealers
https://superclassics.eu/de/directory/cc-parts/
other wise go a us parts dealer
https://www.velocity-group.de/en/universal-parts/brake/
https://www.us-speed-shop.com/
at the end manual 9-2330-251-14$p are the brake pipe`s with lengt for self made
george
if i need some special brake parts i have them from C $ C parts baarlo holland
site is below in german
at the site bottom stand also german brake dealers
https://superclassics.eu/de/directory/cc-parts/
other wise go a us parts dealer
https://www.velocity-group.de/en/universal-parts/brake/
https://www.us-speed-shop.com/
at the end manual 9-2330-251-14$p are the brake pipe`s with lengt for self made
george
- richard
- Command Sergeant Major
- Posts: 620
- Joined: August 10th, 2011, 5:52 am
- Location: Lower Saxony, Germany
- Contact:
Re: M416A1 brake lines
Rick, George,
Thank you very much, I think I have now in hand what I am looking for. Very appreciated.
Best regards,
Richard
Thank you very much, I think I have now in hand what I am looking for. Very appreciated.
Best regards,
Richard
European Distributor for CMD Body Panels: http://www.M151BodyPanels.eu
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter
1978 M151-A2
1978 M416-A1
1972 M561
1964 M35-A2 w/winch & shelter