M-4 Pedestal Bolts

Wanna give your mutt some teeth? This is the place.

Moderators: rickf, raymond, Mr. Recovery

Post Reply
moose53
Site Admin
Site Admin
Posts: 2640
Joined: November 25th, 2007, 8:44 pm
Location: Moscow PA
Contact:

M-4 Pedestal Bolts

Unread post by moose53 » November 26th, 2007, 8:41 pm

Anyone know what the bolt sizes were to attach the M-4 pedestal to the jeep? The installation instructions only give nsn numbers, no sizes...

Jim
Zigzag50, Northeast51, KC2QDZ
MVPA # 30032 G838.org

--------------------------------------
1971 G838-M151A2 1966 G857-M416
1968 G748-M101A1 1976 G748-M116A1
1990 MEP-701A

--------------------------------------
Real jeeps have horizontal grille slots

GI.
civilian
Posts: 6
Joined: December 6th, 2007, 11:18 am
Location: ga.

Unread post by GI. » December 6th, 2007, 3:20 pm

Moose, I used 3/8 bolt,s with a 5/8 head 1- 1/2 long. it may not be the proper one,s but they work ok. iv,e had them on my jeep for seven years now and display a 50cal. mbh2 plus can and fake ammo. no problems at all.

User avatar
bogoble
Private First Class
Private First Class
Posts: 19
Joined: December 8th, 2007, 12:53 pm
Location: Left Coast, Long Beach, CA

bolts

Unread post by bogoble » January 12th, 2008, 5:30 pm

I think....I used 7/16 sae which fit the holes
NRA Patron
1942 MB
M151A2
1914 Model T Ford

Lead me, follow me, or get out of my way.
Courage is fear holding on a minute longer.
No good decision was ever made in a swivel chair.
Patton

Post Reply