Master cylinder fitting leak

This is the place to get help with technical matters concerning your M151 jeep

Moderators: rickf, raymond, Mr. Recovery

User avatar
Cav Trooper
Staff Sergeant
Staff Sergeant
Posts: 142
Joined: March 27th, 2018, 4:32 pm

Re: Master cylinder fitting leak

Unread post by Cav Trooper » April 11th, 2019, 10:19 pm

You heat and quench copper to anneal. Copper and brass work harden. You just heat brass and air cool to anneal that alloy. Different than steel.

Post Reply