CMD Body Panels

lpcoating · Unread post by **lpcoating** » February 19th, 2019, 6:13 pm

Barlow L wrote:I need four right now. How soon can we start bugging you for them?

I was in an off site training today. I'll get with the boys tomorrow and see if we can make the adjustments and some parts. Will know by end of week. I'll keep everyone posted...

Guy

Barlow L · Unread post by **Barlow L** » February 19th, 2019, 6:36 pm

I noticed a spine on the dies. Are you indexing them on your press brake? If that's the case, you could zero out your die setup time by bedding them to a Danly Die Set.

lpcoating · Unread post by **lpcoating** » February 20th, 2019, 1:29 pm

Barlow L wrote:I noticed a spine on the dies. Are you indexing them on your press brake? If that's the case, you could zero out your die setup time by bedding them to a Danly Die Set.

All they have to do is makes the ends of the die flush and let 'er fly. It's only 18ga...

Guy

lpcoating · Unread post by **lpcoating** » February 24th, 2019, 9:15 am

We made some adjustments and this is the updated version. The last picture shows it overlayed on a side panel. It is the same profile as the side panel and when properly installed, will look like one continuous piece. Price for just the patch will be $30 each. We're going to run 50 of them this week. Next on the side panels will be the axe mounts and flange plate where the head goes through the side panel.

Guy

lpcoating · Unread post by **lpcoating** » February 24th, 2019, 9:29 pm

Mark · Unread post by **Mark** » February 25th, 2019, 6:55 am

I just sent you an email about the patch with a picture ,the patch pieces(I want) would be one for each side(the pic was showing the passenger side only)

lpcoating · Unread post by **lpcoating** » February 25th, 2019, 12:23 pm

The picture with the side panel is the driver side, rear wheel. The corner piece is the same angle on the front and rear.

Guy

Flyingvan911 · Unread post by **Flyingvan911** » February 25th, 2019, 12:35 pm

Very nice!

lpcoating · Unread post by **lpcoating** » February 28th, 2019, 4:07 pm

We now have 50 pieces in stock for the side panel lower radius piece. I'll get the orders processed for those that want them at this time.

Guy

Barlow L · Unread post by **Barlow L** » March 1st, 2019, 7:34 am

I'll take 4.

Husker · Unread post by **Husker** » March 1st, 2019, 3:30 pm

I need 2!

Mark · Unread post by **Mark** » March 1st, 2019, 5:19 pm

I don't know if I am on order for 2 yet

lpcoating · Unread post by **lpcoating** » March 1st, 2019, 6:24 pm

Mark wrote:I don't know if I am on order for 2 yet

They are packed and will go out USPS on Monday.

Guy

Mark · Unread post by **Mark** » March 1st, 2019, 7:37 pm

Thank you, might order 2 more, I have to look at the A2

lpcoating · Unread post by **lpcoating** » March 10th, 2019, 10:27 pm

CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels

Re: CMD Body Panels