Best M151A1 parts source????
Moderators: rickf, raymond, Mr. Recovery
Best M151A1 parts source????
Can anyone tell me the best place to order M151A1 parts. im not having much luck in contacting some of the suppliers from the resource list on here. Just looking for basic repair parts like brake shoes, brake hoses, master cylinder, rubber boot kits, data plates, , any guidance is greatly appreciated, thanks
dan
dan
-
- Brigadier General
- Posts: 2607
- Joined: December 9th, 2007, 10:49 am
- Location: ~ Heaven ~
Re: Best M151A1 parts source????
Try Frontline Military Vehicles for parts.
A good guy and reliable source.
Fil Bonica
A good guy and reliable source.
Fil Bonica
K1ABW
Re: Best M151A1 parts source????
To add to the thread -
Frontline is here - http://www.flmv.net/FLMV-M151.htm
Then there is
Rapco - http://www.rapcoparts.com/
Surplus - http://www.surplusjeep.com/
AJP - https://www.armyjeepparts.com/
Big Mike's - https://www.bigmikesmotorpool.com/
Erik's - https://www.eriksmilitarysurplus.com/mivepa.html
DL - https://www.dlbensinger.com/
Eastern Surplus - https://www.easternsurplus.net/
Midwest - https://midwestjeepwillys.com/military-truck-parts.html
Red River in Texas but you either have to email, call, or purchase from their ebay store.
plus if you look at the cross-references in the wiki you can find some of the things you may be looking for at NAPA or your local autozone, orielly's, etc. http://g838.org/public_html/wiki/doku.p ... rence_list
and of course Ebay
Frontline is here - http://www.flmv.net/FLMV-M151.htm
Then there is
Rapco - http://www.rapcoparts.com/
Surplus - http://www.surplusjeep.com/
AJP - https://www.armyjeepparts.com/
Big Mike's - https://www.bigmikesmotorpool.com/
Erik's - https://www.eriksmilitarysurplus.com/mivepa.html
DL - https://www.dlbensinger.com/
Eastern Surplus - https://www.easternsurplus.net/
Midwest - https://midwestjeepwillys.com/military-truck-parts.html
Red River in Texas but you either have to email, call, or purchase from their ebay store.
plus if you look at the cross-references in the wiki you can find some of the things you may be looking for at NAPA or your local autozone, orielly's, etc. http://g838.org/public_html/wiki/doku.p ... rence_list
and of course Ebay
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Re: Best M151A1 parts source????
Surveyor, Big Mikes used to be right around the corner from me but he moved out to Colorado I think and I have not heard from him since. He might be active on Steel Soldiers but I have not looked. Those numbers for him will not be good though.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Best M151A1 parts source????
There is also tnj Murray. They can be pricey, but have a lot of good parts
Re: Best M151A1 parts source????
And I just ordered from them... mind is slipping. It's hit or miss on who has the cheaper parts but then you have to factor in shipping if you go for multiple vendors. Wasn't that long ago I picked up a couple of door frames from TJM for around $20 apiece plus shipping. Cheapest I could find in my searches. Now it looks like they are up to $40.
Rick - I also ordered from Big Mike's through the website recently for some banjo washers for MC. Came in pretty quickly with no problems.
Rick - I also ordered from Big Mike's through the website recently for some banjo washers for MC. Came in pretty quickly with no problems.
1960 M151 Run #1
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
"There is one nut on a M151 that is very difficult to remove....." - K8icu
"She ain't a Cadillac and she ain't a Rolls, But there ain't nothin' wrong with the radio" - Aaron Tippin
Re: Best M151A1 parts source????
Ok, I guess he is still operating his store from wherever he moved to. I miss having him right nearby. He had M37 parts and I had planned on getting a bunch of stuff from him since he was five minutes away.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Re: Best M151A1 parts source????
awesome gentlemen, greatly appreciated and helpful
-
- Brigadier General
- Posts: 2083
- Joined: July 20th, 2009, 11:49 pm
- Location: Va. Beach & NC Outer Banks
Re: Best M151A1 parts source????
These are the two I have use over the last 10 years.
Owens Export, Steve Owens stevek@owens-export.com based in CA, have not talked to him in years but he was the first vendor I used, don't see many here use him but he was a great resource. They supply most of the MV used in Hollywood movies, I never asked for something he did not have.
Red River, Blake Callaway, bcallaway@redriverparts.com , TX used them many times over the last 6 years, usually had what I needed and prices fair.
Also, Thomas Hibiske has been selling parts on the site lately, he is a owner with a large fleet of MV's selling off parts, great guy, if he has what you want can't go wrong.
I am sure all the others are great also.
Clell
Owens Export, Steve Owens stevek@owens-export.com based in CA, have not talked to him in years but he was the first vendor I used, don't see many here use him but he was a great resource. They supply most of the MV used in Hollywood movies, I never asked for something he did not have.
Red River, Blake Callaway, bcallaway@redriverparts.com , TX used them many times over the last 6 years, usually had what I needed and prices fair.
Also, Thomas Hibiske has been selling parts on the site lately, he is a owner with a large fleet of MV's selling off parts, great guy, if he has what you want can't go wrong.
I am sure all the others are great also.
Clell
1976 M151A2 4 Color Cammo Mutt, aquired August 09
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!
1976 or 7? M151A2 "Miss Sandy" Driver, aquired May 2010
Former owner M151A2 "Miss Saigon" Vietnam Rescue Sold Sept 09
Fond appreciation for the M151 Breed!!